| SCREEN | Length mm | 1410 | 1460 | 1760 | 1980 | 2080 | 2380 | 2530 | 2650 | 2940 |
| CUTTING | Length mm | 1398.5 | - | 1738.5 | 1968.5 | - | 2518.5 | 2918.5 | ||
| PRINTING | Width mm |
1280 | 1280 | 1280 | 1280 | 1850 | 2250 | 2400 | 2400 | 2800 |
| REPEAT | MESH | PKG. | %(open Area) |
| 640 | 40 | 20 | 28 |
| 640 | 60 | 20 | 24 |
| 640 | 70 | 20 | 22 |
| 640 | 80 | 20 | 20 |
| 640 | 100 | 20 | 18 |
| 640 | 110 | 20 | 18 |
| 640 | 125 | 20 | 15 |
| 640 | 130 | 20 | 12 |
| 640 | 150 | 20 | 11 |
| 640 | 155 | 20 | 10 |
*Special Screens with the special mesh of 11mesh, 15mesh, 17mesh, 20mesh, 25mesh, 30mesh, 40mesh, 50mesh, 70mesh, 85mesh, 110mesh are avaliable, the technical data will be according to your requirement.
*Special Screens with the special repeat of 518mm, 537mm, 574mm, 725mm, 762mm , 923mm, 1067mm are avalible. The technical date are approximately same as the value of the near repeat screens as above.
*Any technical data change for improvement will be made without notice in advance.
Our high quality range of Nickel Perforated Rotary Screen has such properties that are direct outcome of the high technology and premium components and raw materials we use in the manufacturing process. Our range in this Nickel Perforated Rotary Screen offers wide ranging solutions to textile industry for textile printing.
To maintain the durability and repeat use, our screen thickness is higher than ordinary screen in average 10-15 micro by compare its weight, our screen weight is heavier than ordinary screen in average 100 grams. According to our end users in asian countries such as hong kong, indonesia and thailand our rotary screen can repeat be used 3 to 4 times.
According to the quality requirement, the differences between the two ends of the rotary screen must be less than 50 micron in thickness and must lower than 0. 5 - 1 % in open area.Other ordinary rotary screen is doubled in that figures of the differences between the two ends than ours. our screen can guarantee that the differences in thickness is less than 5 micron and the open area difference is less than 0. 5%. normally, the ordinary screen has a common problem that two ends is thicker and middle is thinner, the difference is about 10 micron to 15 micron.
We can supply mesh count: 80, 100, 105, 125, 135, 155, 180 per inch.
We also have full range in length: 1280mm-3500mm (57"-138"), repeat: 640mm(25"), 725mm(28.5"), 820mm (32"), 914mm (36"), 1017mm (40"), 1680mm (66")
